 |
|  |
 |
|
Bundy LaO
|
|
So I moved back home from college where I played Civ3 all the time, I brought my comp with me but not the monitor. I plug in the monitor we have back home (it's 2 inches smaller), start civ3 and i see this blurry screen of civ, with parallel versions of itself after every inch...
ex:
|asdf|asdf|asdf|asdf|asdf|asdf|
where asdf is what i should be seeing across the whole screen, but it is copied into small parallel lines.
I searched for an answer and I found a place on these forums that said download "powerstrip" and make sure it is running. I did that (got the newest version), it is running, but it still occurs.
any help would be appreciated.
|
|
|  |
 |
|
vondrack

|
 |
Praha, Czech Republic
Jan 2002 time: 06:34
|
|
Bundy, this is most likely because of your home monitor not being capable of handling the 1024x768 resolution. Try switching to this resolution in Windows (w/o Civ3 running) - right-click on the Desktop, select Properties, Settings and try increasing the screen resolution to 1024x768. Then go to "Advanced" and under Adapter or Monitor, check the refresh rate - should be something like 60, 72, or 75 Hz. Then click "Apply" - and see if it works (if not, the screen settings will return to the previous working state in 15 seconds, no worries).
I suspect that you will get the same problem even without Civ3 - means your monitor is not capable of running 1024x768, which is the native mode for Civ3. There is a way of running Civ3 in 800x600, but I would suggest getting a new monitor instead...
|
|
|  |
All times are GMT. The time now is 05:34. Apolyton Time is 00:34. |
top of page
|
|
|
Forum Rules:
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
|
HTML code is ON
vB code is ON
Smilies are ON
[IMG] code is ON
|
|
|
|
|
|